My inspection was originally scheduled for Friday, May 18th
and I made sure to communicate with the PM way ahead of time and check in with
him on the Wednesday before just to confirm that the date still worked. Despite
all of this communication, I received a call from the inspector Friday morning
to say that he was at the house and it was not ready for inspection. Long
stressful story made short, basically the PM was thinking that the inspector
was just coming to inspect the basic framing and didn’t know that the rough ins
needed to be done. According to the inspector, all PMs should know that an
outside inspection is done at the same time as the county inspection so he
should have been aware of what needed to be done and when he needed to have it
done by.
Either way, I was finally able to have the inspection done
last week and I am so glad that I did. He didn’t find a ton of issues, but the
ones that he did find probably would not have been flagged by the county and
have the potential for expensive damage down the line. There were a few areas
where contractors had damaged the floor supports in addition to some of the
wiring not being insulated correctly. This is why it was important for his inspection to take place after all of the roughs ins had been done.
This is a potential structural issue since puncturing the top or bottom of this beam compromises the ability of the beam to support weight appropriately. There were a few other places where this occurred.
Damage to a wall stud.
Apparently copper and metal should not touch since erosion of the copper may occur and lead to issues in a few years time. There were several areas where this was found.
Glen from Pro Spex did the inspection and I would highly
recommend him, if asked. He was very informative about various components of the
house and I definitely learned more from him than I have from my PM. For
instance, he told me about how to tell if a wall is load bearing and the
various pieces of wood that were used to transfer weight from a non-load
bearing wall to a load bearing wall. The things caught in the pictures above would have never been flagged by myself during any of my walk throughs. I am still deciding about the final
inspection once everything is done, but if I decide to do it I will definitely
them a call back.



